Round Serrated Tray, Presentation, Coaster Set - Hobby Silicone Mold SN11 - Code:
- Rectangular Tray, Presentation, Cup Coaster Set- Hobby Silicone Mold- Code:
- Measurement:
- Large Mold 30 cm
Medium Mold 23 cm
Small Mold 10 cm - 8mm depth
- Resin epoxy silicone injection molds are heat-resistant and easy-to-release, meaning they can be removed from the resin epoxy casts easily after drying, and they can withstand a high temperature environment ranging from approximately 200 to 300 degrees Celsius, which allows for rapid drying of resin epoxy casts.
-
Our silicone molds are reusable and not for one-time use only resin molds. Resin epoxy molds can be used in various fields and can create differences in many sectors depending on your imagination.
-
Usage: Pour 2 parts resin to 1 part hardener into a container and mix slowly until no air bubbles remain. Mix thoroughly for 10-15 minutes by stirring from right to left, left to right, and bottom to top. During mixing, the stirring stick should touch the bottom and sides of the container to achieve a homogeneous mixture.
Then let the mixture rest for 5 minutes, pour it into the mold, and let it dry. It will become touchable after about 6 hours. It will completely harden within 24 hours and reach a glass-like state in 48 hours. -
Color: Transparent
-
Important notice:
- The general lifespan of a mold is usually 10 uses, but some of our model molds can last between 20-25 uses.
- Taking good care of your mold and following proper usage and cleaning procedures can help you prolong its lifespan.
- We recommend using mold release spray, which preserves the gloss of the mold and ensures a longer lifespan.
- Non-alcohol-based wet wipes are the most effective in cleaning epoxy residues.
- Do not clean silicone molds with alcohol or solvent-based products, and avoid touching the mold with your fingers.
-
@CUSTOMER_NAME@
@AUTHOR_PROFILE@ @COMMENT_ISO_COUNTRY@@COMMENT_TITLE@
@COMMENT_COMMENT@