Resin Epoxy Silicone Soap Mold 34x13x3 cm

Epoxy Resin Silicone Soap Mold

Product dimensions: 34x13x3 cm

Epoxy resin silicone injection molds are heat resistant and easy to release, allowing epoxy resin casts to be removed easily after drying, ensuring fast curing in epoxy resin casts, capable of withstanding high temperatures between approximately 200 and 300 degrees Celsius. Additionally, our silicone molds are reusable and not for one-time use only. Epoxy resin molds can be used in many fields and can create variations in many sectors depending on your imagination. Currently, we have more than 600 models of epoxy resin molds in Turkey.

Usage: Pour 2 parts resin and 1 part hardener into a container and mix slowly until no air bubbles remain. Mix thoroughly from right to left, left to right, and bottom to top for 2-3 minutes. During mixing, the mixing stick should create a homogeneous mixture touching the bottom and sides of the container. Let the mixture rest for 5 minutes, then pour it into the mold and let it dry. It becomes touchable in about 6 hours and completely hardens within 12 hours. It takes on a scratch-resistant glass-like appearance in 48 hours. Color: Transparent

Important notice:

The general lifespan of the mold is about 10 uses, while some of our models can be used for 20-25 times. Taking good care of your mold and following proper usage and cleaning procedures can help extend its lifespan. We recommend using a mold release spray, as it maintains the mold's glossiness and ensures a longer lifespan. Non-alcohol-based wet wipes are the most effective in cleaning epoxy residues. Never clean silicone molds with alcohol or solvent-based products, and avoid touching the mold with your fingers.