Tray Silicon Epoxy and Concrete Mold - Rectangular - Code:200
This Model is Suitable for Epoxy and Concrete Casting
Size: 20*30*1
Resin epoxy silicone injection molds are heat resistant and easily removable, meaning they can be removed after the product has dried, providing a resin epoxy mold that can withstand high temperatures, typically between 200 and 300 degrees Celsius, enabling rapid curing of resin epoxy casts. Our silicone molds are also reusable, not for one-time use only. Depending on your imagination, resin epoxy molds can create variations in many sectors. Currently, we have over 600 resin epoxy mold models in Turkey.
Instructions: Pour 2 parts resin to 1 part hardener into a container and mix slowly until no air bubbles remain. Mix thoroughly for 2-3 minutes in a right-to-left, left-to-right, and bottom-to-top motion. The mixing rod should touch the bottom and sides of the container to achieve a homogeneous mixture. Let the mixture rest for 5 minutes, then pour it into the mold and let it dry. It becomes touchable after approximately 6 hours and completely hardens within 12 hours. It acquires a scratch-resistant glass-like finish in 48 hours.
Color: Transparent
Code GJ079
The general usage life is 20 around 10, while in some model molds, it is between 20-25.
Taking good care of your mold and following proper usage and cleaning procedures can help prolong its lifespan.
We recommend using mold release spray, which helps maintain the mold's shine and ensures a longer lifespan.
Non-alcohol-based wet wipes are the most effective for cleaning up epoxy liquids.
Never clean silicone molds with alcohol or solvent-based products and avoid touching the mold with your fingers.
@CUSTOMER_NAME@
@AUTHOR_PROFILE@ @COMMENT_ISO_COUNTRY@@COMMENT_TITLE@
@COMMENT_COMMENT@