Epoxy Resin Sets Deal - 4

Inside the set:

Epoxy Mold: 3 Pieces (Different Models)

Resin Sticker: 1 Piece

Resin Liquid Glass Material: 1 Piece

Wooden Pendant End: 1 Piece

Powder 10gr: 1 Packet

Caviar Gold: 1 Packet

Caviar Silver: 1 Packet

Sandpaper 15x9cm: 1 Piece

Resin Sticker Small: 1 Piece

Non-stick, easy to use, environmentally friendly, low carbon consumption, and easily recyclable
Simple and practical, naturally antibacterial, high strength softness,
Not easily damaged, crack resistant to extreme temperatures -40 C/230 C (-40 F-446 F)
Safe, non-toxic, odorless, evenly heated
Material: Silicone

Instructions: Pour 2 parts resin to 1 part hardener into a container and mix slowly until no air bubbles remain.
Mix from right to left, left to right, and bottom to top for 2-3 minutes. During mixing,
the mixing stick should touch the bottom and sides of the container to ensure a homogeneous mixture.
Let the mixture rest for 5 minutes, then pour into the mold and let it dry.
It will be touch-dry in about 6 hours. It will fully harden within 12 hours.
It will achieve a scratch-resistant glass-like finish in 48 hours.