Resin Epoxy HEART Mold - Heart - Code:368

Epoxy Resin Mold - Heart

Epoxy resin silicone injection molds are heat resistant and easy to release, meaning they can be removed from the resin epoxy casts after they have dried. These molds can withstand high temperatures, typically between 200 to 300 degrees Celsius, which ensures quick drying of resin epoxy casts. Additionally, our silicone molds are reusable and not for one-time use. Epoxy resin molds can be used in various fields and can create differences in many industries depending on your imagination. Currently, we have more than 180 models of epoxy resin molds available in Turkey.

Instructions: Pour 2 parts resin and 1 part hardener into a container, and mix slowly until no air bubbles remain. Mix thoroughly for 2-3 minutes by stirring from right to left, left to right, and bottom to top. Ensure a homogeneous mixture by touching the mixing stick to the bottom and sides of the container during mixing. Let the mixture rest for 5 minutes, then pour it into the mold and let it dry. It will be touchable after approximately 6 hours and fully harden within 12 hours. It will reach a scratch-resistant glass-like state within 48 hours. Color: Clear

Product Code: 003-c

• Important Notice:

  • The general lifespan of molds is around 10 uses, but some models can last between 20-25 uses.
  • Taking good care of your mold and following proper usage and cleaning procedures can extend its lifespan.
  • We recommend using mold release spray, wax, or varnish to maintain the mold's shine and ensure a longer lifespan.
  • Non-alcohol-based wet wipes are the most effective in cleaning epoxy residues.
  • Avoid cleaning silicone molds with alcohol or solvent-based products, and do not touch the mold with your fingers.