Epoxy Resin Backgammon Silicone Mold Model 47.5 cm x 27.5 cm x 2 cm

    mold size 27.5 x 47.5 x 2 cm

The visual dimensions in the photo are provided to indicate the actual dimensions, only the shapes of the molds are different

This product is a silicone epoxy mold specially designed for backgammon game.

By pouring epoxy resin into the mold, a backgammon board is obtained. The mold is ready with triangular shapes specific to backgammon (areas where the checkers are placed) and slots for placing the pieces.

• Material: Flexible silicone (for easy removal).

• Instructions:

  1. Clean the mold surface and apply mold release spray if necessary.

  2. Mix epoxy resin in the desired color (either single color or multi-color patterns can be created).

  3. Pour the epoxy carefully into the mold.

  4. Heat gun or torch can be used to remove air bubbles.

  5. Once the curing time is completed (24-48 hours), the product can be easily removed from the mold.

• Number of Uses: Quality silicone molds can be used comfortably 20-50 times. Proper cleaning and careful use can extend its lifespan.

 Number of Uses

• Quality silicone molds can be used comfortably more than 20-30 times in epoxy usage and more than 200 times in uses such as concrete plaster if used correctly.

• If the mold is properly maintained, used with epoxy curing, and depending on the quality of the epoxy used, the lifespan of the mold will be extended.

• If the mold is not damaged by harsh chemicals, not exposed to sunlight, and stored correctly, it can be used for much longer periods.