80 cm Round Table & Coffee Table Silicone Mold with 4 cm Depth

Our silicone molds are reusable, not for one-time use resin molds. Resin epoxy molds can be used in many fields and can create differences in various sectors depending on your imagination.

Usage: Pour 2 parts resin to 1 part Catalyst into a container and mix slowly until no air bubbles remain. Mix thoroughly from right to left, left to right, and up and down for 10-15 minutes. A homogeneous mixture should be provided by touching the mixing stick to the bottom and sides of the container during mixing.
Then let the mixture rest for 5 minutes, pour it into the mold, and let it dry. It becomes touchable by hand after approximately 6 hours. It completely hardens within 24 hours.
It becomes glass-like within 48 hours.

Color: Transparent

• Important warning:

  • The general lifespan of the mold is usually 10 times, while some of our model molds can be used 20-25 times.
  • Taking good care of your mold and following proper use, cleaning procedures can help you use it for a longer time.
  • We recommend using mold release spray, which preserves the gloss of the mold and ensures a longer lifespan.
  • Non-alcohol-based wet wipes are the most effective material for cleaning and removing epoxy residues.
  • Avoid cleaning silicone molds with alcohol and solvent-based products, and be careful not to touch the mold with your fingers.