EPOXY RESIN SILICONE MOLD - MULTIPLE EARRINGS - 211

Epoxy Resin Mold Multi Earring 13.8 x 15.8 cm

Epoxy resin silicone injection molds are heat resistant and easy to release, meaning they can be removed from the product after it has dried, allowing for quick curing of resin epoxy pours in a high-temperature environment of approximately 200 to 300 degrees. Our silicone molds are also reusable, non-disposable resin molds. Epoxy resin molds can be used in many different fields, creating various differences depending on your imagination.

Usage: Epoxy resin is poured into a container and slowly stirred until no air bubbles remain. Stir the mixture from right to left, left to right, and bottom to top for 2-3 minutes. During mixing, the mixing stick should touch the bottom and sides of the container to ensure a homogeneous mixture. Then, let the mixture rest for 5 minutes, pour it into the mold, and let it dry. It becomes touchable by hand after approximately 6 hours. It completely hardens within 12 hours and becomes scratch-resistant like glass in 48 hours.

Color: Transparent

• Important notice:

  • Taking good care of your mold and following proper usage and cleaning procedures can help you use it for a longer period.
  • Non-alcohol-based wet wipes are the most effective material for cleaning epoxy liquids.
  • Avoid cleaning silicone molds with alcohol- or solvent-based products and make sure not to touch the mold with your fingers.