5 PIECES 4 cm Depth 35 cm Round Table & Coffee Table - Hobby Silicone Mold / SN23-35

Our silicone molds are reusable and not for one-time use only resin molds. Resin epoxy molds can be used in many areas and can create differences in many sectors depending on your imagination.

Usage: Pour 2 parts resin to 1 part hardener into a container and mix slowly until there are no air bubbles left. Stir the mixture thoroughly for 10 - 15 minutes in a back and forth, side to side, and up and down motion. During stirring,
the mixing stick should touch the bottom and sides of the container to ensure a homogeneous mixture.
Then, let the mixture rest for 5 minutes, pour it into the mold, and let it dry. 
It becomes touchable by hand after approximately 6 hours. It fully hardens within 24 hours.
It takes on a glass-like appearance within 48 hours.

Color: Transparent

• Important notice:

  • The general lifespan of the mold is usually 10 uses, while some model molds can be used up to 20-25 times.
  • Taking good care of your mold and following proper usage and cleaning procedures can help prolong its lifespan.
  • We recommend using mold release spray, as it preserves the mold's glossiness and ensures a longer lifespan.
  • Non-alcohol-based wet wipes are the most effective in cleaning epoxy residues.
  • Avoid cleaning silicone molds with alcohol or solvent-based products, and be careful not to touch the mold with your fingers.