Heart Terrazzo Coaster Mini Tray Resin Epoxy and Concrete Mold - Code:1278

Heart Terrazzo Coaster Mini Tray Resin Epoxy and Concrete Mold - Code: 1278

115gr

The Heart Terrazzo Coaster Mini Tray Resin Epoxy and Concrete Mold features an elegant and modern terrazzo pattern. This mold, made of silicone material, is ideal for use in resin, epoxy, and concrete projects. It allows you to create elegant and functional mini trays and coaster sets.

Resin epoxy silicone injection molds are heat resistant and easy to release, meaning they can be removed from the resin epoxy castings after they have dried, enabling quick curing at a high temperature range of approximately 200 to 300 degrees in a hot environment. Additionally, our silicone molds are reusable and not for one-time use resin molds. Our resin epoxy molds, which can be used in many fields, can create differences in various sectors according to your imagination. Currently, we have more than 600 resin epoxy mold models in Turkey.

Instructions: Pour 2 parts resin to 1 part hardener into a container and mix slowly until no air bubbles remain. Mix thoroughly for 2-3 minutes by stirring from right to left, left to right, and bottom to top. During mixing, the stirring rod should touch the bottom and sides of the container to create a homogeneous mixture. Let the mixture rest for 5 minutes, then pour it into the mold and let it dry. It will be touchable by hand in about 6 hours and completely hardened within 12 hours. It will obtain a scratch-resistant glass-like finish in 48 hours. Color: Transparent

Important Note:

• The general lifespan of a mold is usually around 10 uses, but some of our models can be used up to 20-25 times.
• Taking good care of your mold and following proper usage and cleaning procedures can extend its lifespan.
• We recommend using mold release spray, which preserves the mold's shine and extends its lifespan. An alcohol-free wet wipe is the most effective tool for cleaning epoxy liquids.
• Absolutely do not clean silicone molds with alcohol or solvent-based products, and avoid touching the mold with your fingers.