Ocean Wave Epoxy Resin Silicone Mold - Hobby Silicone Mold - Code:1220

Ocean Wave Epoxy Resin Silicone Mold - Hobby Silicone Mold - Code:

After removing the mold, it is necessary to apply epoxy resin or polish for shining.

Mold Size:

Height: 20.2 cm

Width: 17.2 cm

Depth: 4.9 cm

Mold Weight: 250gr

There may be slight variations in mold dimensions. The numbers are average measurements.

Usage: Pour 2 parts resin into 1 part freezing container and mix slowly until no air bubbles remain. Mix the mixture thoroughly for 2-3 minutes by stirring right to left, left to right, and bottom to top. During mixing, the mixing stick should create a homogeneous mixture touching the bottom and edges of the container. Then let the mixture rest for 5 minutes, pour it into the mold, and let it dry. It becomes touchable in about 6 hours and completely hardens within 12 hours. It acquires a scratch-resistant glass-like state in 48 hours. Color: Transparent

Important note:

The general lifespan of the mold is 10 times, and in some model molds, it can be 20-25 times. Taking good care of your mold and following proper usage and cleaning procedures can extend its lifespan. We recommend using mold release spray, which preserves the mold's shine and ensures long-term use. Alcohol-free wet wipes are the most effective method for cleaning epoxy residues. Never clean silicone molds with alcohol or solvent-based products, and avoid touching the mold with your fingers.