Epoxy Resin Mold - Friendship Necklace Heart Model - E.ARK

Epoxy resin silicone injection molds are heat resistant and easy to remove, allowing the resin epoxy castings to dry quickly in a hot environment between approximately 200 to 300 degrees Celsius.

Our silicone molds are reusable and not for one-time use only. Resin epoxy molds can be used in many fields and create differences in various sectors based on your imagination.

Usage: Pour 2 parts resin to 1 part hardener into a container and mix slowly until no air bubbles remain. Mix thoroughly from right to left, left to right, and bottom to top for 10-15 minutes. The mixing stick should touch the bottom and sides of the container to provide a homogeneous mixture.
Afterwards, let the mixture rest for 5 minutes, pour it into the mold, and let it dry. It becomes touchable after approximately 6 hours. It fully solidifies within 24 hours.
It achieves a glass-like state within 48 hours.

Color: Transparent

• Important notice:

  • The general lifespan of the mold is 10 uses, but some of our model molds can last between 20-25 uses.
  • Taking good care of your mold and following proper cleaning procedures can extend its lifespan.
  • We recommend using mold release spray, which preserves the glossiness of the mold and ensures a longer lifespan.
  • Non-alcohol-based wet wipes are the most effective material for cleaning epoxy liquids.
  • Avoid cleaning silicone molds with alcohol or solvent-based products and do not touch the mold with your fingers.