5 pieces of Epoxy Natural Stone-Look Coaster Mold 10cm depth 8 mm.

• 5 Pieces 10cm - Serrated Edge Coaster Mold

Mold Diameter: 10cm

Depth: 8mm

There May Be Slight Variations in Dimensions.

• Resin epoxy silicone injection molds are heat resistant and easy to release, meaning they can be removed from the resin epoxy casts after they have dried. They are resin epoxy molds that can withstand high temperatures, typically between 200 and 300 degrees Celsius, in a hot environment, allowing for quick drying of resin epoxy casts.

• Our silicone molds are reusable and not for one-time use only resin molds. Resin epoxy molds can be used in many different fields and can create variations in many sectors depending on your imagination.

• Usage: Pour 2 parts resin to 1 part hardener into a container and slowly mix until no air bubbles remain. Stir the mixture thoroughly for 10-15 minutes in a back and forth, left to right, and bottom to top motion. During mixing, the mixing stick should touch the bottom and sides of the container to ensure a homogeneous mixture. Let the mixture rest for 5 minutes, then pour it into the mold and let it dry. It becomes touchable after about 6 hours and completely hardens within 24 hours. It reaches a glass-like state within 48 hours.

• Color: Transparent