5 pieces of 12cm x 10cm - Cloud Edge Coaster Mold

• 5 Pieces 12cm x 10cm - Cloud Edge Coaster Mold

Size of the Mold: 12cm x 10cm

Depth: 8mm

There May Be Slight Variations in Dimensions.

• Resin epoxy silicone injection molds are heat-resistant and easy to detach, meaning they can be removed after the product has dried. They are resin epoxy molds that can withstand high temperatures, around an average of 200 to 300 degrees, in a hot environment to ensure quick drying of resin epoxy pours.

• Our silicone molds are reusable and not for single use. Resin epoxy molds can be used in many different areas and can create variations in many sectors depending on your imagination.

• Usage: Pour 2 parts resin to 1 part hardener into a container and mix slowly until no air bubbles remain. Mix thoroughly for 10 - 15 minutes by stirring from right to left, left to right, and top to bottom. During mixing, the mixing stick should touch the bottom and sides of the container to achieve a homogeneous mixture. Let the mixture rest for 5 minutes, then pour it into the mold and let it dry. It becomes touchable in about 6 hours and fully hardens within 24 hours. It reaches a glass-like state in 48 hours.

• Color: Transparent