Epoxy Resin Multi Silicone Jewelry Mold - 221

Epoxy Resin Mold Multi Mold - 16.2 x 25.7 cm

Epoxy resin silicone injection molds are heat resistant and easily removable, meaning they can be taken out after the product has dried, enabling rapid curing of epoxy resin pours in a hot environment with an average temperature range of 200 to 300 degrees, which can withstand high temperatures. Our silicone molds are reusable and not for one-time use. Epoxy resin molds can also be used in various fields, creating differences in many sectors depending on your imagination.

Usage: Epoxy resin is poured into a container and slowly stirred until no air bubbles remain. Stir the mixture from right to left, left to right, and bottom to top for 2-3 minutes. During stirring, the mixing stick should touch the bottom and sides of the container to provide a homogeneous mixture. Then, let the mixture rest for 5 minutes, pour it into the mold, and leave it to dry. It becomes touchable after about 6 hours and completely hardens within 12 hours. It takes on a scratch-resistant glass-like appearance in 48 hours.

Color: Transparent

• Important warning:

  • Taking good care of your mold and following proper usage and cleaning procedures can help prolong its lifespan.
  • Non-alcohol-based wet wipes are the most effective material for cleaning epoxy residues.
  • Avoid cleaning silicone molds with alcohol- or solvent-based products, and be careful not to touch the mold with your fingers.