15.7cm x 3.5cm - Double Feather Hobby Silicone Mold - Code: 1231

• 15.7cm x 3.5cm - Dual Feather Hobby Silicone Mold

Feather size: 15.7x3.5 cm

Depth: 3 mm

There may be slight differences in measurements.

• Resin epoxy silicone injection molds are heat resistant and easy to demold, meaning they can be removed after the product has dried. They are resin epoxy molds that can withstand high temperatures, typically between 200 and 300 degrees Celsius, in a hot environment, ensuring quick drying of resin epoxy casts.

• Our silicone molds are reusable and not for one-time use resin molds. Resin epoxy molds can be used in many different areas, creating variations in many sectors depending on your imagination.

• Usage: Pour 2 parts resin to 1 part hardener into a container and mix slowly until no air bubbles remain. Mix thoroughly for 10-15 minutes by stirring from right to left, left to right, and bottom to top. During mixing, the mixing stick should touch the bottom and sides of the container to achieve a homogeneous mixture. Let the mixture rest for 5 minutes, then pour it into the mold and let it dry. It becomes touchable in about 6 hours and fully hardens within 24 hours. It reaches a glass-like state in 48 hours.

• Color: Transparent