Swan Candle Mold - Code:1086

• Swan Candle Mold - Code:

Mold Size: 100x113 mm

Mold Thickness: 31 mm

There May Be Slight Variations in Measurements.

• Resin epoxy silicone injection molds are heat-resistant and easy-to-release molds that can withstand an average temperature of 200 to 300 degrees Celsius, allowing for quick drying of resin epoxy castings and easy removal after the product has dried.

• Our silicone molds are reusable, not for one-time use only. Resin epoxy molds can be used in many different fields, creating various possibilities depending on your imagination.

• Usage: Pour 2 parts resin to 1 part hardener into a container and mix slowly until no air bubbles remain. Stir the mixture thoroughly for 10-15 minutes by mixing from right to left, left to right, and bottom to top. During mixing, the mixing stick should touch the bottom and sides of the container to ensure a homogeneous mixture. Let the mixture rest for 5 minutes, then pour it into the mold and let it dry. It will be touch-dry in about 6 hours and fully hardened within 24 hours. It will achieve a glass-like state in 48 hours.

• Color: Transparent