Round Epoxy and Concrete Silicone Mold - Code:497

Epoxy resin silicone injection molds are heat-resistant and easily removable, meaning they can be removed after the product has dried. They are resin epoxy molds that can withstand high temperatures, typically between 200 and 300 degrees Celsius, creating a fast curing environment for resin epoxy castings.

Our silicone molds are reusable and not for one-time use. Resin epoxy molds can be used in many areas and can create differences in various industries depending on your imagination.

Usage: Pour 2 parts resin to 1 part hardener into a container and mix slowly until no air bubbles remain. Mix thoroughly from right to left, left to right, and bottom to top for 10-15 minutes. During mixing, ensure a homogeneous mixture by touching the bottom and sides of the container with the mixing stick. Allow the mixture to rest for 5 minutes, then pour it into the mold and let it dry. It will be touchable after approximately 6 hours and completely hardened within 24 hours. It will turn into glass-like state within 48 hours.

Color: Transparent

• Important Note:

  • The general lifespan of the mold is 10 uses, while some of our model molds can last between 20-25 uses.
  • Taking good care of your mold and following proper usage and cleaning procedures can help prolong its lifespan.
  • We recommend using mold release spray, as it maintains the mold's shine and ensures longevity.
  • Non-alcohol-based wet wipes are the most effective in cleaning epoxy residues.
  • Avoid cleaning silicone molds with alcohol or solvent-based products, and do not touch the mold with your fingers.