Cheese Knife Stand Silicone Mold - Hobby Silicone Mold - Code: 460

• Cheese Knife Stand Silicone Mold

• Mold width: 23 cm
• Mold depth: 2 cm
• Inner width: 22 cm

There may be slight variations in dimensions.

• Resin epoxy silicone injection molds are heat resistant and easy to release, meaning they can be removed from resin epoxy casts quickly after drying, and can withstand temperatures in a hot environment ranging from about 200 to 300 degrees, allowing for rapid drying of resin epoxy products.

• Our silicone molds are multi-use, non-disposable resin molds that can be used in many different fields, creating variations in many sectors depending on your imagination.

• Usage: Pour 2 parts resin to 1 part hardener into a container and mix slowly until no air bubbles remain. Stir thoroughly for 10-15 minutes in a back-and-forth, side-to-side, and up-and-down motion. During mixing, the stirring rod should touch the bottom and sides of the container to achieve a homogeneous mixture. Let the mixture rest for 5 minutes, then pour into the mold and let it dry. It will be touch-dry in about 6 hours and fully hardened within 24 hours. It will reach a glass-like state in 48 hours.

• Color: Transparent