Tree of Life Decorative Epoxy and Concrete Mold - Hobby Silicone Mold - Code:

• Tree of Life Decorative Epoxy and Concrete Mold

This model is suitable for Epoxy and Concrete Casting.

Mold Size: 20.7 cm in diameter
0.9 cm deep
182 grams

Product Size:

There may be slight variations in dimensions.

• Resin epoxy silicone injection molds are heat resistant and easy to separate, meaning they can be removed from resin epoxy casts after drying, and can withstand temperatures between approximately 200 to 300 degrees Celsius in a hot environment, allowing for quick curing of resin epoxy casts.

• Our silicone molds are reusable and not disposable resin molds. Resin epoxy molds can be used in many fields, creating variations in different sectors depending on your imagination.

• Usage: Pour 2 parts resin to 1 part hardener into a container and mix slowly until no air bubbles remain. Mix thoroughly from right to left, left to right, and bottom to top for 10-15 minutes. During mixing, the mixing stick should touch the bottom and sides of the container to achieve a homogeneous mixture. Let the mixture rest for 5 minutes, then pour it into the mold and allow it to dry. It will be touch dry in about 6 hours and fully hardened within 24 hours. It will reach a glass-like state in 48 hours.

• Color: Transparent