Leaf Model Round Concrete Planter Mold - Hobby Silicone Mold - Code:1158

• Leaf Model Round Concrete Pot Mold

Mold Size: 10.8 x 8 cm

Product Size: 9.8 x 7.8 cm

Sizes may vary slightly.

• Resin epoxy silicone injection molds are heat-resistant and easily separable, meaning they can be removed from resin epoxy casts after drying. They are resin epoxy molds that can enable rapid drying in resin epoxy casts, with a high heat resistance that can withstand temperatures between approximately 200 to 300 degrees Celsius in a hot environment.

• Our silicone molds are reusable and not for one-time use only. Resin epoxy molds that can be used in many areas can create variations in many sectors depending on your imagination.

• Usage: Pour 2 parts resin to 1 part hardener into a container and mix slowly until no air bubbles remain. Mix thoroughly for 10 - 15 minutes, alternating between right to left, left to right, and bottom to top. During mixing, the mixing stick should touch the bottom and sides of the container to achieve a homogeneous mixture. Let the mixture rest for 5 minutes, then pour it into the mold and let it dry. It becomes touchable after approximately 6 hours and completely hardens within 24 hours. It achieves a glassy state in 48 hours.

• Color: Transparent