Hexagonal Concrete Planter Mold - Hobby Silicone Mold - Code:

• Hexagonal Concrete Planter Mold

Mold Size: 5.6 x 9 cm

Product Size: 5 x 8.7

There May Be Slight Variations in Dimensions.

• Resin epoxy silicone injection molds are heat-resistant and easily removable, meaning they can be removed after the product has dried. They are resin epoxy molds that can withstand high temperatures, approximately between 200 to 300 degrees Celsius, in a hot environment, allowing for quick drying of resin epoxy casts.

• Our silicone molds are reusable and not for one-time use. Resin epoxy molds that can be used in many areas can create differences in many sectors depending on your imagination.

• Usage: Pour 2 parts resin to 1 part hardener into a container and mix slowly until no air bubbles remain. Mix thoroughly for 10-15 minutes by stirring from right to left, left to right, and bottom to top. During mixing, the mixing stick should touch the bottom and sides of the container to ensure a homogeneous mixture. Let the mixture rest for 5 minutes, then pour it into the mold and let it dry. It becomes touch-dry in about 6 hours, fully hardened within 24 hours, and glass-like within 48 hours.

• Color: Transparent