Large Oyster Candle Mold - Hobby Silicone Mold - Code: 1059 Large

• Large Oyster Candle Mold

Mold Size: 9.7 x 7 cm

Product Size:

There may be slight variations in measurements.

Resin epoxy silicone injection molds are resistant to heat and easy to release, meaning they can be removed from the resin epoxy castings after drying, and they can withstand high temperatures of approximately 200 to 300 degrees Celsius in a hot environment, allowing rapid curing of resin epoxy products.

Our silicone molds are reusable and not for one-time use resin molds. Resin epoxy molds can be used in many fields and can create variations in many sectors depending on your imagination.

Usage: Pour 2 parts resin to 1 part hardener into a container and mix slowly until no air bubbles remain. Stir the mixture thoroughly for 10-15 minutes, moving from right to left, left to right, and bottom to top. The stirring rod should touch the bottom and sides of the container to achieve a homogeneous mixture. Let the mixture rest for 5 minutes, then pour it into the mold and let it dry. It will be touchable in about 6 hours and fully hardened within 24 hours. It will turn into a glass-like state within 48 hours.

Color: Transparent