Round Chimney House Concrete Mold - Hobby Silicone Mold - Code: 1076

• Round Chimney House Concrete Mold

Mold Size: 41mm x 38mm

Product Size: 30mm x 32mm x 18mm

There May Be Slight Variations in Dimensions.

• Resin epoxy silicone injection molds are heat resistant and easy to detach, allowing the product to be removed after drying for resin epoxy casts that require rapid curing at high temperatures, typically between 200 and 300 degrees Celsius in a hot environment.

• Our silicone molds are reusable and not for one-time use resin molds. Resin epoxy molds can create variations in many sectors depending on your imagination.

• Usage: Pour 2 parts resin and 1 part hardener into a container, slowly mix until no air bubbles remain. Mix thoroughly for 10 - 15 minutes in a back and forth, side to side, and up and down motion. The mixing stick should create a homogeneous mixture touching the bottom and sides of the container. Let the mixture rest for 5 minutes, then pour it into the mold to dry. It will be touch dry in about 6 hours and fully hardened within 24 hours. It will achieve a glass-like finish in 48 hours.

• Color: Transparent