Hanging Round Concrete Planter Mold - Hobby Silicone Mold - Code:1123

• Hanging Round Concrete Pot Mold
• Mold Size: 7.3x4.5 cm, 145 grams

Product Size: 6x4 cm

There may be slight variations in measurements.

Resin epoxy silicone injection molds are heat-resistant and easily removable, allowing the product to be taken out after drying. These molds can withstand high temperatures, typically between 200 and 300 degrees, in a hot environment, which enables quick curing of resin epoxy castings.

Our silicone molds are reusable and not for one-time use. Resin epoxy molds can be used in various fields, creating different products depending on your imagination.

Usage: Pour 2 parts resin to 1 part hardener into a container and mix slowly until no air bubbles remain. Mix thoroughly for 10-15 minutes in a back-and-forth, up-and-down motion. During mixing, ensure the mixing stick touches the bottom and sides of the container to create a homogeneous mixture. Let the mixture rest for 5 minutes, then pour it into the mold and let it dry. It becomes touchable after about 6 hours and completely hardens within 24 hours, taking on a glass-like appearance in 48 hours.

Color: Transparent