Hollow Oval Concrete Planter Mold - Hobby Silicone Mold - Code: 511

• Hollow Concrete Oval Planter Mold

Size: 16.5x10x3 cm

98 Grams

There may be slight differences in measurements.

• Resin epoxy silicone injection molds are heat-resistant and easily removable molds that can withstand temperatures between approximately 200 to 300 degrees Celsius in a hot environment, allowing for quick drying of resin epoxy casts after they have dried.

• Our silicone molds are reusable and not for one-time use. Resin epoxy molds can be used in many areas, creating variations in many industries depending on your imagination.

• Usage: Pour 2 parts resin to 1 part hardener into a container and slowly stir until no air bubbles remain. Stir the mixture thoroughly for 10-15 minutes in a back and forth, up and down motion. During stirring, the mixing stick should touch the bottom and sides of the container to achieve a homogeneous mixture. Let the mixture rest for 5 minutes, then pour it into the mold and let it dry. It becomes touchable in about 6 hours and fully hardens within 24 hours. It reaches a glass-like state in 48 hours.

• Color: Transparent