Plane Tree Leaf - Hobby Silicone Mold - Code: SN1235

Our silicone molds are multi-use, not disposable resin molds. Resin epoxy molds can also be used in various fields, creating differences in many sectors depending on your imagination.

Usage: Pour 2 parts resin to 1 part hardener into a container, and slowly mix until no air bubbles remain. Mix thoroughly for 10-15 minutes, stirring from right to left, left to right, and bottom to top. Homogeneous mixing should be achieved by touching the mixing stick to the bottom and sides of the container.
Then let the mixture rest for 5 minutes, pour it into the mold, and leave it to dry. It can be touched by hand after about 6 hours. It will fully harden within 24 hours. It will take on a glass-like appearance in 48 hours.

Color: Transparent

• Important note:

  • The general lifespan of a mold is usually 10 uses, but some of our models can be used 20-25 times.
  • By taking good care of your mold and following proper cleaning procedures, you can extend its lifespan.
  • We recommend using mold release spray as it maintains the gloss of the mold and ensures a longer lifespan.
  • Non-alcohol-based wet wipes are the most effective in cleaning epoxy liquids and residues.
  • Do not clean silicone molds with alcohol or solvent-based products, and be careful not to touch the mold with your fingers.