Round Pendant Jewelry Resin Epoxy Mold - Code: 157

Round Pendant Jewelry Resin Epoxy Mold - 1.4 x 4.9 cm

Resin epoxy silicone injection molds are heat resistant and easy to release, meaning they can be removed from the product after it has dried, and they can withstand high temperatures of around 200 to 300 degrees Celsius, allowing for quick curing of resin epoxy pours. Our silicone molds are reusable and not for one-time use. Depending on your imagination, resin epoxy molds can create differences in many sectors. Currently, we have more than 600 resin epoxy mold models in Turkey.

Usage: Pour 2 parts resin to 1 part hardener into a container and mix slowly until no air bubbles remain. Mix thoroughly by stirring from right to left, left to right, and bottom to top for 2-3 minutes. During mixing, the stirring stick should touch the bottom and sides of the container to create a homogeneous mixture. Let the mixture rest for 5 minutes, then pour it into the mold and allow it to dry. It can be touched by hand after approximately 6 hours and completely hardens within 12 hours. It takes on a scratch-resistant glass-like appearance within 48 hours. Color: Transparent

Product Code: GJ081

Important notice:

• Generally, the lifespan of the mold is 10 uses, but some of our mold models can be used up to 20-25 times.
• Taking good care of your mold and following proper usage and cleaning procedures can extend its lifespan.
• We recommend using mold release spray, as it maintains the mold's glossiness and prolongs its lifespan.
• Non-alcohol-based wet wipes are the most effective for cleaning epoxy liquids.
• Avoid cleaning silicone molds with alcohol or solvent-based products and refrain from touching the mold with your fingers.