5 pieces of Epoxy Resin Mold for Coasters - Oval - B5

5 Pieces Cup Bottom Resin Epoxy Mold - Oval - 14 x 11 cm

Resin epoxy silicone injection molds are heat resistant and easily removable, meaning they can be removed after the product has dried, and they can withstand high temperatures, typically between 200 and 300 degrees, in a hot environment that enables quick drying of resin epoxy pours. Additionally, our silicone molds are reusable and not for one-time use only. Resin epoxy molds can be used in many different fields and can create variations depending on your imagination. In Turkey.

Usage: Pour 2 parts resin and 1 part hardener into a container and mix slowly until no air bubbles remain. Mix thoroughly from right to left, left to right, and top to bottom for 10 - 15 minutes. During mixing, the mixing stick should touch the bottom and edges of the container to ensure a homogeneous mixture. Then, let the mixture rest for 5 minutes, pour it into the mold, and let it dry. It becomes touchable by hand after approximately 6 hours. It completely hardens within 24 hours and turns into glass within 48 hours. Color: Transparent

• Important warning:

  • The general lifespan of the mold is 10 uses, but some of our models can be used up to 20-25 times.
  • Taking good care of your mold and following proper usage and cleaning procedures can extend its lifespan.
  • We recommend using mold release spray, as it maintains the gloss of the mold and prolongs its lifespan.
  • Non-alcohol-based wet wipes are the most effective in cleaning epoxy liquids.
  • Avoid cleaning silicone molds with alcohol or solvent-based products and refrain from touching the mold with your fingers.