Epoxy Natural Stone Look Mold 10cm depth 8mm

• 10cm - Toothed Edge Coaster Mold

Mold diameter: 10cm

Depth: 8mm

There May Be Slight Variations in Dimensions.

• Resin epoxy silicone injection molds are heat-resistant and easy to release, meaning they can be removed from resin epoxy casts after they have dried. These molds can withstand temperatures between approximately 200 to 300 degrees Celsius in a hot environment, ensuring quick curing of resin epoxy casts.

• Our silicone molds are reusable and not for one-time use. Resin epoxy molds can be used in various fields and can create differences in many sectors depending on your imagination.

• Usage: Pour 2 parts resin to 1 part hardener into a container and mix slowly until no air bubbles remain. Stir the mixture thoroughly for 10-15 minutes in a back and forth, left to right, and bottom to top motion. During mixing, the stirring stick should touch the bottom and edges of the container to achieve a homogeneous mixture. Let the mixture rest for 5 minutes, then pour it into the mold and let it dry. It becomes touchable in about 6 hours and completely hardens within 24 hours. It reaches a glass-like state within 48 hours.

• Color: Transparent