Multiple Serrated Hologram Magnet Coaster Silicone Epoxy Mold - Code:538

Epoxy Multi Hologram Magnet Coaster Silicone Mold

Resin epoxy silicone injection molds are heat-resistant and easily removable, meaning they can be taken out of resin epoxy casts after drying. They are molds for resin epoxy that allow for quick drying of resin epoxy casts, with a high heat resistance of around 200 to 300 degrees Celsius. Our silicone molds are reusable and not for one-time use only. Resin epoxy molds can be used in various fields and can create differences in many sectors based on your imagination. Currently, we have more than 600 resin epoxy mold models in Turkey.

Usage: Pour 2 parts resin and 1 part hardener into a container and slowly stir until no air bubbles remain. Stir the mixture from right to left, left to right, and top to bottom for about 2-3 minutes. During stirring, the stirring stick should touch the bottom and sides of the container to create a homogeneous mixture. Let the mixture rest for 5 minutes, then pour it into the mold and let it dry. It becomes touchable after about 6 hours and completely hardens within 12 hours. It achieves a scratch-resistant glass-like finish in 48 hours.

Product Code:

Important Note:

• The general lifespan of molds is 10 uses, while some of our mold models can be used up to 20-25 times.
• Taking good care of your mold and following proper cleaning procedures can extend its lifespan.
• We recommend using mold release spray or wax varnish to maintain the mold's shine and ensure a longer lifespan.
• Non-alcohol-based wet wipes are the most effective in cleaning epoxy liquids.
• Avoid cleaning silicone molds with alcohol or solvent-based products and refrain from touching the mold with your fingers.