Seahorse - Epoxy Resin - Concrete Silicone Mold SN35 - Code:

Our silicone molds are reusable and not for one-time use only. Resin epoxy molds can be used in many fields and can create differences in many industries depending on your imagination.

Usage: Pour 2 parts resin to 1 part hardener into a container and mix slowly until no air bubbles remain. Mix thoroughly from right to left, left to right, and bottom to top for 10 - 15 minutes. During mixing, ensure that the mixing stick touches the bottom and sides of the container to achieve a homogeneous mixture.
Then, let the mixture rest for 5 minutes and pour it into the mold, allowing it to dry.
After approximately 6 hours, it can be touched by hand. It will completely harden within 24 hours.
It will achieve a glass-like appearance within 48 hours.

Color: Transparent

• Important note:

  • The general lifespan of the mold is 10 uses, while some of our model molds can be used between 20-25 times.
  • Taking good care of your mold and following proper cleaning procedures can help extend its lifespan.
  • We recommend using mold release spray, which maintains the gloss of the mold and ensures a longer lifespan.
  • Non-alcohol-based wet wipes are the most effective for cleaning epoxy residues.
  • Do not clean silicone molds with alcohol or solvent-based products, and avoid touching the mold with your fingers.