Multiple Small Resin Epoxy Mold - Code: 68

Multiple Small Resin Epoxy Mold 4.8 x 6.5 cm

Epoxy resin silicone injection molds are heat-resistant and easily separable, meaning they can be removed after the product has dried. These molds are capable of rapid curing in resin epoxy pours, with a high heat resistance of around 200 to 300 degrees Celsius, allowing them to be preserved in a hot environment. Additionally, our silicone molds are reusable, non-disposable resin molds. Resin epoxy molds can be used in many fields and can create variations in different sectors based on your imagination. Currently, we have more than 600 resin epoxy mold models in Turkey.

Usage: Pour 2 parts resin to 1 part hardener into a container and mix slowly until no air bubbles remain. Mix thoroughly for 2-3 minutes from right to left, left to right, and bottom to top. During mixing, the mixing stick should create a homogeneous mixture touching the bottom and sides of the container. Let the mixture rest for 5 minutes, then pour it into the mold and let it dry. It will be touchable in about 6 hours and fully hardened within 12 hours. It will take on an unscratchable glass-like appearance in 48 hours. Color: Transparent

Product Code: GJ057

Important Warning:

• The general lifespan of a mold is usually 10 uses, while some of our mold models can last between 20-25 uses.
• Taking good care of your mold and following proper usage and cleaning procedures can extend its lifespan.
• We recommend using mold release spray, as it preserves mold shine and ensures longer usability.
• Non-alcohol-based wet wipes are the most effective for cleaning epoxy liquids.
• Avoid cleaning silicone molds with alcohol and solvent-based products, and be careful not to touch the mold with your fingers.